Sale Starts Monday 1/11/21 taking appointments now to go to the location to view equipment.

Inventory changing Daily upon Finalized Sales

Check out our large selection of used sawmill equipment. Interested parties can contact Julie Kistner at 541-451-6677 or email [email protected]. Full lists can be emailed directly to you. Click on the Categories below.

  • CSMI/KLOCKUMS CANCAR 6’ QUAD VERTICAL BANDMILL W/200 HP DRIVES, USNR MODEL 34 CHIPPING MODEL, USNR 1 - 1/2 LENGTH SHARP CHAIN SYSTEM, 2013 MPM SCANNING
  • SOLD FILER & STOWELL 48” RH 3-KNEE CARRIAGE W/IESCO 400 HP DRIVE
  • 6 FOOT TWIN HORIZONTAL BAND SAW
  • SCHURMAN MODEL 12DAG48 GANG EDGER W/(2) 500 HP MOTORS
  • KOCKUMS CANCAR 6’ QUAD VERTICAL BAND RESAW W/150 HP DRIVES, INFEED POSITIONING TABLE
  • KOCKUMS CANCAR 6’ TWIN RBS BAND RESAW W/150 HP DRIVES, USNR MODEL 34 CHIPPING MODULE, 2014 MPM/JOE SCAN SCANNER, USNR MODEL 700 CANT FEED TABLE
  • SOLD KOCKUMS CANCAR 4”x36” BOARD EDGER W/250 HP DRIVES, 2013 MPM/JOE SCAN SCANNER RETROFIT MODEL “C” INFEED, BOTH W/EDRIVE POSITIONING
  • NEWNES/MCGEHEE 4”x36” 4-SAW OPTIMIZED BOARD EDGER W/250 HP DRIVE
  • MAGNUM 10’x20’ 5-STEP HYDRAULIC OPERATED STEP FEEDER
  • FILER & STOWELL 9’ RH DOUBLE CUT HEADRIG BANDMILL
  • CM&E RH 36” 8-KNIFE SLABBER W/250 HP DRIVE
  • LOG TURNER HYDRAULIC OPERATED LOG TURNER W/ LOG STOP ARM
  • SOLD SIMONDS LEVELER TYPE RMO942 Serial #03-942-391
  • Bridge Crane
  • CM&E Slabber, 36" Head, 250-hp Motor, Hydraulic Actuated Linear Positioner, Controls, Steel Base & Supports - REF#M76
  • SOLD Filer Stowell Bandmill, 9 ft Double Cut, 300-hp Drive Motor, Stell Support Structure & Enclosure, Concrete Base - REF#M77

  • Kockums Cancar Bandmill, Twin, 6ft Single Cut, (2) 200-hp Drive Motors, Setworks, Steel Base, Positioner System, Hydraulic Piping & Valves, Controls, Pure Lube Model MX-999X Lubrication System, Steel Support Structure, Concrete Base, - REF#M92

  • USNR Bandmill, Twin, 6 ft. Single cut, (2) 200-hp Drive Motors, Setworks, Steel Base, Positioner System, Hydraulic Piping & Valves, Controls, Pure Lube Model MX-999X Lubrication System, Steel Support Structure, Concrete Base - REF#M93

SOLD - 400-hp Iesco Carriage Drive Motor & Cable System, Controls, Piping & Valves, Pantograph Arm, Operators Control Cab, CCTV System, Softac/Omego Control Console, Inovec Yieldmaster - REF#M75A

  • SOLD Filer Stowell Carriage, 48" Capacity Three Knee, Tapers, #90 Track, Bumpers - REF#M75
  • SOLD CM&E Slabber, 36" Head, 250-hp Motor, Hydraulic Actuated Linear Positioner, Controls, Steel Base & Supports - REF#M76
  • USNR Sharp Chain System, (Renovated old Coe Alhstrom Optimill System w/New Top Rolls and other Improvements in 2003), 2013 MPM Scanning & Optimization & PLC, USNR Vertical Quad Rolls with Two Pair 13.75" diameter Knurled Rolls w/10-hp VFD Drives - REF#M90
  • USNR Conical Chipper Assembly, Model 34, Serial #3467K, 30-degree VEE, (2) 40" Lindex Conical Floating Face Six Fane and Six Finish Knife Heads, each w/150-hp 750-rpm Drive Motors, (2) 5" bore x 18" Hydraulic Linear Positioners for Chip Heads with Temposonic - REF#M91

Schurman Edger, Gang, Model 12DAG 48" Edger Serial #2817, (2) 500-HP Motors, Controls, Operators Controls, Lubrication System, Steel Support Structure - REF#M150

  • Schurman Edger (Reman), Model 4TA 48" Reman Edger, Serial #2166, 150-hp Motor, Setworks, Lazer Lights, (2) Powered Infeed Rolls, Steel Support Structure - REF#M128
  • SOLD Kockums Cancar #1 Edger with 2013 MPM Scan & Optimization, (16) Joe Scan Heads, PLC & Controls, VFD Drives, Retrofit horizontal Pass Through System, w(7) 12" dia X 24" Angled Even End Chain Driven Rolls, 5-hp Gearhead Drive, 12 ft 7 Strand #120RC Chain - REF#M154
  • SOLD Kockums Cancar Edger, Optimizing, Retrofit Model "C" Optimized System, 20 ft. Infeed Serial #4389-1530 Setworks, Infeed System, Operators Control Cab, CCTV System, Steel Support Structure - REF#M157
  • McGhee Edger, Optimizing, Clam Shell, 4" Top Arbor, 4 Saw, #3 Retech Splined Shaft, 250-hp Drive Motor, Setworks, Saw Guide Lubrication System, Summit 80-3-5PEP Sharp Top Center Chain, 28 pieces per minute max. - REF#M201

Kockum Cancar Resaw, Twin, 6ft Horizontal, Infeed & Outfeed Systems, Positioner System, Dynamic Brakes, Air & Hydraulic Piping & Valves, Controls, Operator Cab, CCTV System - REF#M105

  • Kockums Cancar Resaw, Quad Band Saw-RBS Canter, 6 ft. Vertical, Two USNR Model 34 horizontal Canter Heads w/Horizontal Slide Ways, 150-hp 750 rpm Motors, Serial #3491K, w/Two Lindex 40" diameter Six Knife & Six Finish Knife Chipping Heads - REF#M119
  • Kockums Cancar Resaw, Twin, 6 ft. Vertical, Positioner System, Hydraulic Piping & Valves, Controls, Linebar Infeed w/ (6) 12" dia. X 48" Chain Driven Rolls, Cant Turner System & Lift Arm System, Outfeed System w/Drop Out Gates & Slide, Operators Control Cab - REF#M137
  • SOLD - Allen-Bradley #755 Powerflex MOD# 20G1AND186AAONNNNNN 150 hp - REF#AC Inver Drives 1
  • SOLD Allen-Bradley #700 Powerflex MOD# 20BD077A3AYNAC0 60 HP / 50 HD - REF#AC Inver Drives 2
  • SOLD Allen-Bradley #70 15 HP - REF#AC Inver Drives 3-1
  • SOLD Allen-Bradley #70 20 HP - REF#AC Inver Drives 3-2
  • SOLD Allen-Bradley #70 5 HP - REF#AC Inver Drives 3-3
  • SOLD Allen-Bradley #70 5 HP - REF#AC Inver Drives 3-4
  • SOLD Toshiba G7 - 30 HP - REF#AC Inver Drives 4-1
  • SOLD Toshiba G7 - 20 HP - REF#AC Inver Drives 4-2
  • SOLD Toshiba G3 - 40 HP - REF#AC Inver Drives 5-1
  • SOLD Toshiba G3 - 40 HP - REF#AC Inver Drives 5-2
  • SOLD - Allen Bradley 1756 -17 Slot Rack, CPU #572 Logic, Ethernet #3EA, I/P = IAC / 3 DC, O/P = 1 DC - REF#PLC #2 
  • SOLD - Allen Bradley 1756 - (2) 10 Slot Racks, Ethernet # 2 EA Module, I/P = 6 AC, O/P = 3 AC, I/P = 1 DC, Analog = 1 Out, Analog = 1 Input - REF#PLC #3
  • SOLD - Allen Bradley 1756 - 10 Slot, Ethernet #1, I/P = 1, O/P = 8 - REF#PLC #4
  • SOLD - Allen Bradley 1756 - 10 Slot, Ethernet #1, I/P = 2 AC, O/P = 4 AC, O/P = 1 DC, I/P = 1 DC, Analog = 1 - REF#PLC #7
  • SOLD - Allen Bradley 1756 - 15 Slot, Ethernet = 3 EA, CPU = 5561,, SERV05 = 1, I/P = 3 DC, O/P = 1 DC, I/P = 3 AC - REF#PLC #10
  • SOLD - Allen Bradley 1756 - 10 Slot, Ethernet = 1 EA, O/P = 6 EA AC - REF#PLC #11
  • SOLD - Allen Bradley 1756 - 10 Slot, CPU #5561, Ethernet = 2 EA, I/P = 1 AC, O/P = 2 AC, I/P = 1 DC, O/P = 1 DC - REF#PLC #12 
  • SOLD - Allen Bradley 1756 - 10 Slot, CPU #5561, Ethernet = 1 EA, O/P = 2 DC, I/P = 2 DC, O/P = 1 AC, I/P = 2 AC - REF#PLC #13
  • SOLD - Allen Bradley 1756 10 SLO O/P = 2 DC, IP = 2 AC, Analog - I/P DC 1, O/P = 2 AC, Analog I/P = 1 - REF#PLC #14
  • G.E. 8000 / 7700, Buss 800, Main Breaker 800 Sections = 5, Single Sided, Number of Buckets = 8, Breaker Style - REF#MCC #1
  • G.E. 8000 / 7700, Buss 800, Main Breaker 800 Sections = 4, Back - Back, Number of Buckets = 25, Note : 3 EA 6" Feeders - REF#MCC #2
  • G.E. 8000 / 7700, Buss 800, Main Breaker Sections = 10, Back - Back, Number of Buckets = 49, Note : 5 EA 6" Feeders - REF#MCC #3
  • G.E. 8000 / 7700, Buss 800, No Main, , Sections = 6, Single Sided, Number of Buckets = 25 - REF#MCC #4
  • G.E. 8000 / 7700 (XFM Room) Buss 800, No Main MLO, Sections = 5, Single Sided, Number of Buckets = 20 - REF#MCC #5
  • G.E. 8000 / 7700, Buss 800, Main Breaker 800, Sections = 3, Double Sided, Number of Buckets = 20 - REF#MCC #6
  • G.E. 8000 / 7700, Buss 800, Main Breaker 800, Sections = 6, Single Sided, Number of Buckets = 5, (4 EA size #5 for Saws) - REF#MCC #7
  • G.E. 8000 / 7700, Buss 800, Main Breaker 800, Sections = 4, Double Sided, Number of Buckets = 17, (HORZ TWIN) - REF#MCC #8
  • G.E. 8000 / 7700 , Buss 600, Main is 7700 Style, Sections = 7, Single Sided, Number of Buckets 19 = 7700 , 12 = 8000 - REF#MCC #9
  • G.E. 8000 / 7700, Buss 600 / 600 Main, Sections = 6, Single Sided, Number of Buckets = 12 - REF#MCC #10
  • G.E. 8000 / 7700, Buss 800, No main MLO, Sections = 4, Single Sided, Number of Buckets = 12 (4 = Size #4 - Tech 150) - REF#MCC #11
  • G.E. 7700 Old Style, Buss 600 Main 600, Sections = 4, Single Sided, Number of Buckets = 13 (I-225 bucket) - REF#MCC #12
  • G.E. 8000 / 7700, Buss 600, Main 225 AMPS, Number of Sections = 5, Single Sided, Number of Buckets = 16 - REF#MCC #13
  • G.E. 8000 / 7700, Buss 800, Main 800, Number of Sections = 6, Single Sided, Number of Buckets = 26 - REF#MCC #14
  • G.E. 8000 / 7700, Buss 800, Main 800, Number of Sections = 6, Single Sided, Number of Buckets = 20 - REF#MCC #15
  • G.E. 8000 / 7700, Buss 800, Main 800 7700, Number of Sections = 5, Single Sided, Number of Buckets = 18 - REF#MCC #16
  • G.E. 8000 / 7700, Buss 800, MLO, Number of Sections = 5, Single Sided, Number of Buckets = 16 - REF#MCC #17
  • G.E. 8000 / 7700, Buss 800, MLO, Number of Sections = 6, Single Sided, Number of Buckets = 15 - REF#MCC #18
  • Transformer #1 General Electric, 750 KVA, Dry Type Transformer, Line-Up, 15KV Load Break Switch, 1200 AMP GE Breaker, Primary Voltage 12,0000, Secondary Voltage 480Y/277 - REF#Transformer #1
  • Transformer #2 General Electric, 1,000 KVA, Silicone, Primary Voltage 12,000, Secondary Voltage 480Y/277 - REF#Transformer #2
  • Transformer #3 General Electric, 2,000 KVA, Silicone, Primary Voltage 12,000, Secondary Voltage 2,400 - REF#Transformer #3
  • SOLD Switchgear #4 (for Transformer #3) 4 EA General Electric Power Vac Breakers, 1200 AMP, Type VB1 4.16-250-3 - REF#Switchgear #4
  • SOLD SOLA 23 - 23 - 250 - 8, 5000VA, 120-240V - REF#Electronics 1
  • SOLD Federal -Pacific 50 KVA<, #S2T5OE , PRIM 240/480, SEL 120/240 - REF#Electronics 2
  • Benshaw Brakes #DCB160-480-12 , 100-150 HP (2) - REF#Electronics 3
  • Safetronics Soft Start #EX 6-360-H.D. with DY 4 - Brake and Buy-Pass Contactor, 300 HP Heavy Duty, Enclosure - REF#Electronics 4
  • Safetronics Soft Start #EZ6-360-HD Spare in Box - REF#Electronics 5
  • SOLD - Benshaw Soft Start #RB2-3-S-600-480-H-12-FDOP , 600 HP, 720 AMPS, 480 volt, Combination Unit In Nice Enclosure - REF#Electronics 6
  • SOLD Step Feeder 20 ft wide 10 ft log, Five Step, Hydraulic Actuated - REF#M66
  • SOLD Conveyor, Log 40 ft WR124 Chain w/Log Cradles, Heavy Steel Trough, Steel Supports, Head & Tail Sprockets (infeed to sharp chain) - REF#M67
  • SOLD Conveyor, Log 36 ft, WR132 Chain w/Attachments, Heavy Steel Trough, Head & Tail Sprockets, 15-hp Gearhead Drive - REF#M68
  • SOLD Transfer, Log 12 ft 6 Strand WR132, Head & Tail Shafts & Sprockets, Heavy Steel Frame - REF#M69
  • SOLD Conveyor, Log 36 ft, WR 132 Chain w/Attachments, Heavy Steel trough, Head & Tail Sprockets, 15-hp Gearhead Drive - REF#M70
  • SOLD Conveyor, Log 28 ft, WR 132 Chain w/Attachments, Heavy Steel trough, Head & Tail Sprockets, 15-hp Gearhead Drive - REF#M71
  • SOLD Log Sweep, 14 ft Arms, Hydraulic Actuated, Hydraulic Piping & Valves - REF#M72
  • SOLD Transfer, Log , 30ft 4 Strand WR132 Chain, Steel Frame & Races, Steel Deck, Head & Tail Shafts & Sprockets - REF#M73
  • SOLD Log Turner, Hydraulic Actuated, w/Stop Load Arm, Steel Support Structure, Hydraulic Piping & Valves, Controls - REF#M74
  • Rollcase, (5) 12" dia. x 36" Chain Driven Rolls, Steel Frame, 5-hp Gearhead Drive, Air Actuated Gate, Air Piping & Valves, Controls - REF#M78
  • Rollcase, (7) 12" dia. x 72" Chain Driven Rolls, Steel Frame, 5-hp Gearhead Drive, Air Actuated Gate, Air Piping & Valves, Controls - REF#M79
  • Transfer, 8 ft. 6 Strand H788 Chain, Steel Frame & Races, Head & Tail Shafts & Sprockets, 5-hp Gearhead Drive, Air Actuated Jump Section, Air Piping & Valves, Controls - REF#M80
  • Transfer, 30 ft. 6 Strand H78 Chain, Steel Frame & Races, Head & Tail Shafts & Sprockets, 7-hp Gearhead Drive, Wood Deck - REF#M81
  • Rollcase, (11) 12" dia. x 42" Chain Driven Rolls, Steel Frame, 5-hp Gearhead Drive, Air Actuated Gate, Air Piping & Valves - REF#M82
  • Transfer, 8ft. 6 Strand H788 Chain, Steel Frame & Races, Head & Tail Shafts & Sprockets, 5-hp Gearhead Drive, Air Actuated Jump Section, Air Piping & Valves - REF#M83
  • Transfer, 30ft. 6 Strand H78 Chain, Steel Frame & Races, Head & Tail Shafts & Sprockets, 7.5-hp Gearhead Drive, Inclined - REF#M84
  • Transfer, 24ft. 6 Strand H78 Chain, Steel Frame & Races, Head & Tail Shafts & Sprockets, 5-hp Gearhead Drive, Steel Slides - REF#M85
  • Transfer, 26ft. 6 Strand 81X Chain w/Attachmens, Steel Frame & UHMW Races, Head & Tail Shafts & Sprockets, 5-hp Gearhead Drive, Dog Leg Inclined, Idler Rolls - REF#M86
  • Transfer, 8ft. 6 Strand H788 Chain, Landing Table, Steel Frame & Races, Head & Tail Shafts & Sprockets, 5-hp Gearhead Drive, Steel Deck, Steel Backstop & Side Plate - REF#M87
  • Rollcase, (6) 8" dia. X 30" Chain Driven Rolls, (1) 12" dia. X 42" Rubber Faced Chain Driven Roll, 5-hp Gearhead Drive - REF#M88
  • Outfeed, RH Tipple, 28 ft. Long, 36" wide w/(3) Belts & (6)Rolls, Steel Frame & Support Structure - REF#M94
  • Outfeed, LH Tipple, 28 ft. Long, 36" wide w/(3) Belts & (6)Rolls, Steel Frame & Support Structure - REF#M95
  • Conveyor, 84 ft. 36" Belt, Steel Frame, Head & Tail Sheaves, 7.5-hp Gearhead Drive - REF#M96
  • Conveyor, 22 ft. 30" Belt, Steel Frame, Head & Tail Sheaves, 5-hp Gearhead Drive - REF#M97
  • Rollcase, (7) 12" dia. x 30" Chain Driven Rolls, Steel Frame, 5-hp Gearhead Drive, Gate, Piping & Valves - REF#M98
  • Transfer, 12 ft. 6 Strand H788 Chain, Steel frame & Races, 5-hp Gearhead Drive, Air Actuated Jump Section, Piping & Valves - REF#M99
  • Rollcase, (12) 12" dia. x 30" Chain Driven Rolls, Steel Frame, 5-hp Gearhead Drive, Gate, Piping & Valves - REF#M100
  • Transfer, 10ft. 6 Strand H788 Chain, Steel Frame & Races, 5-hp Gearhead Drive, Air Actuated Jump Section, Piping & Valves - REF#M101
  • Rollcase, (9) 8" dia. X 42" Chain Driven Rolls, Steel Frame, 5-hp Gearhead Drive, Gate, Piping & Valves - REF#M102
  • Transfer, 20ft. 6 Strand H78 Chain w/Attachments, Steel Frame & Races, Head & Tail Shafts & Sprockets, 5-hp Gearhead Drive - REF#M103
  • Transfer, 6ft. 6 Strand H78 Chain w/Attachments, Steel Frame & Races, Head & Tail Shafts & Sprockets, 5-hp Gearhead Drive - REF#M104
  • Transfer, 10 ft. 6 Strand H78 Chain, Steel Frame & Races, Head & Tail Shafts & Sprockets, 5-hp Gearhead Drive, (5) 6 ft. long Lumber Lift Bars, Piping & Valves - REF#M106
  • Conveyor, 84 ft. 36" Belt, Steel Frame, Head & Tail Sheaves, 7.5-hp Gearhead Drive - REF#M109
  • Transfer, 12 ft. 6 Strand H788 Chain, Steel Frame & Races, 5-hp Gearhead Drive, Air Actuated Jump Section, Piping & Valves - REF#M111
  • Transfer, 60 ft. 6 Strand H78 Chain, Steel Frame & Races, Head & Tail Shafts & Sprockets, 7.5-hp Gearhead Drive - REF#M112
  • Transfer, 20 ft. 6 Strand H788 Chain, Steel Frame & Races, Head & Tail Shafts & Sprockets, 5-hp Gearhead Drive, Steel Deck, (2) Air Actuated Pin Stops, Piping & Valves - REF#M113
  • Rollcase, (7) 8" dia. X 36" Chain Driven Even Ending Rolls, Steel Frame & Backstop, 5-hp Gearhead Drive, (3) Air Actuated Pin Stops, Air Actuated Frame Lift Assembly, Steel Support Structure - REF#M114
  • Transfer 10 ft. 5 Strand H78, Steel Frame & Races, Head & Tail Shafts & Sprockets, 5-hp Gearhead Drive, (4) Air Actuated Pin Stops, Air Piping & Valves - REF#M115
  • Transfer 8 ft. 5 Strand H78 Chain, Steel Frame & Races, Head & Tail Shafts & Sprockets, 5-hp Gearhead Drive, (3) Air Actuated Five Arm Cant Stops, Air Piping & Valves - REF#M116
  • Transfer 10 ft. 6 Strand 81X Chain, Steel Frame & Races, Head & Tail Shafts & Sprockets, 5-hp Gearhad Drive, (5) 10" dia. X 24" Even End Chain Driven Rolls, Steel Backstop, 3-hp Gearhead Drive - REF#M117
  • 2014 MPM Scanner (Joe Scan Heads) & Optimization / USNR Feed table, USNR 6-Chain Transfer, 5-hp Gearhead Drive, Serial #03086: USNR Model 700 Cant Feed table, 25-hp VFD Drive, Four Linear Positioning Temposonic Hydraulic Cylinders, Serial #3491A2; USNR - REF#M118
  • Transfer 24 ft. 6 Strand H78 Chain, Steel Frame & Races, Head & Tail Shafts & Sprockets, 5-hp Gearhead Drive, Steel Deck - REF#M120
  • Transfer 26 ft. 6 Strand H78 Chain, Steel Frame & Races, Head & Tail Shafts & Sprockets, 5-hp Gearhead Drive, Steel Deck, Inclined - REF#M121
  • Transfer 20 ft. 6 Strand H78 Chain, Steel Frame & Races, Head Shaft, Head & Tail Sprockets, 5-hp Gearhead Drive, Steel Deck, Inclined - REF#M122
  • Rollcase (9) 8" dia. X 42" Angled Chain Driven Rolls, Steel Frame, 5-hp Gearhead Drive, 6 ft 6 Strand H78 Chain w/Attachments, Steel Frame & Races, Head & Tail Shafts & Sprockets, 5-hp Gearhead Drive - REF#M123
  • Conveyor 48 ft 36" Belt, Steel Trough, Head & Tail Sheaves, 5-hp Gearhead Drive, Steel Supports - REF#M124
  • Rollcase (8) 8" dia. X 36" Chain Driven Rolls, Steel Frame, 5-h Gearhead Drive, 5 ft 5 Strand H78 Chain, Steel Frame & Races, Air Actuated Jump Section, Piping & Valves, Controls - REF#M125
  • Transfer 52 ft. 6 Strand H78 Chain, Steel Frame & Races, Head & Tail Shafts & Sprockets, 10-hp Gearhead Drive, (2) Air Actuated Interlocked Drop Gates, Air Actuated Six Arm Lumber Stop, Piping & Valves - REF#M126
  • Transfer 12 ft. 6 Strand H78 Chain, Steel Frame & UHMW Races, Head & Tail Shafts & Sprockets, 5-hp Gearhead Drive, (6) Air Actuated Lumber Stops, Piping & Valves, Controls - REF#M127
  • Transfer 10 ft. 6 Strand H78 Chain, Steel Frame & Races, Head & Tail Shafts & Sprockets, 5-hp Gearhead Drive - REF#M129
  • Transfer 16 ft. 6 Strand H78 Chain w/Attachments, Steel Frame & Races, Head & Tail Shafts & Sprockets, 5-hp Gearhead Drive - REF#M130
  • Rollcase (6) 12" dia. X 42" Chain Driven Rolls, Steel Frame & Deck, 5-hp Gearhead Drive - REF#M131
  • Rollcase (7) 12" dia. X 42" Chain Driven Rolls, Steel Frame & Deck, 5-hp Gearhead Drive, End Stop Plate - REF#M132
  • Transfer, 10 ft. 6 Strand H78 Chain, Steel Frame & Races, Head & Tail Shafts & Sprockets, Air Actuated Jump Section, Piping & Valves 5-hp Gearhead Drive - REF#M133
  • Transfer, 10 ft. 6 Strand H788 Chain, Steel Frame & Races, Head & Tail Shafts & Sprockets, Air Actuated Jump Section, Piping & Valves 5-hp Gearhead Drive - REF#M134
  • Transfer, 62 ft. 6 Strand H78 Chain, Steel Frame & Races, Head & Tail Shafts & Sprockets, 10-hp Gearhead Drive, Wood Deck - REF#M135
  • Transfer, 26 ft. 6 Strand H78 Chain, Steel Frame & Races, Head & Tail Shafts & Sprockets, 5-Wrap, 5-hp Gearhead Drive, Steel Deck, (2) Six Arm Air Actuated Lumber Stops, Piping & Valves - REF#M136
  • Transfer, 12 ft. 6 Strand H78 Chain, Steel Frame & UHMW Races, Head & Tail Shafts & Sprockets, 5-hp Gearhead Drive, (6) Air Actuated Lumber Stop Arm & Skid Bars, Piping & Valves, Controls - REF#M138
  • Transfer, 16 ft. 6 Strand H788 Chain, Steel Frame & Races, Head & Tail Shafts & Sprockets, Landing Table, Steel Deck, 5-hp Gearhead Drive - REF#M139
  • Conveyor, 75 ft. 18" Belt, Steel Though, Head & Tail Sheaves, 7.5-hp Gearhead Drive - REF#M140
  • Rollcase, (14) 8" dia. X 72" Chain Driven Rolls, Steel Frame, Steel Deck, 7.5-hp Gearhead Drive - REF#M141
  • Transfer, 8 ft. 6 Strand H78 Chain, Steel Frame & Races, Head & Tail Shafts & Sprockets, 5-hp Gearhead Drive, Air Actuated Jump Section, Air Piping & Valves, Controls - REF#M142
  • Conveyor, 75 ft 18" Belt, Steel Trough, Head & Tail Sheaves, 7.5-hp Gearhead Drive - REF#M143
  • Transfer, 8 ft 6 Strand H78, Steel Frame & Races, Head & Tail Shafts & Sprockets, 5-hp Gearhead Drive, Air Actuated Jump Section, Air Piping & Valves - REF#M144
  • Transfer, 16 ft 6 Strand H788 Chain, Steel Frame & Races, Head & Tail Shafts & Sprockets, Steel Deck w/End Stop, 5-hp Gearhead Drive, Air Actuated Five Arm Lumber Stop, Piping & Valves - REF#M145
  • Conveyor, 30 ft 30" Belt , Steel Trough, Head & Tail Sheaves, (1) 12" dia. X 36" Chain Driven Rubber Coated Roll, 5-hp Gearhead Drive, Inclined, Steel Supports - REF#M146
  • Conveyor, 24 ft 18" Belt , Steel Trough, Angeled, Head & Tail Sheaves, 5-hp Gearhead Drive - REF#M147
  • Rollcase, (14) 8" dia X 48" Chain Driven Rolls, Angled Steel Frame, Steel Supports, 5-hp Gearhead Drive, (2) Steel Linebars, (1) Adjustable Infeed Gate - REF#M148
  • Conveyor, 20 ft 18" Belt, Steel Trough, Angleed Steel Frame & End Stop, 5-hp Gearhead Drive - REF#M149
  • Transfer, 30 ft 6 Strand H78 Chain, Steel Frame & Races, Head & Tail Shafts & Sprockets, 5-hp Gearhead Drive, Steel Deck - REF#M151
  • Transfer, 12 ft 6 Strand H78 Chain, Steel Frame & Races, Head & Tail Shafts & Sprockets, 5-hp Gearhead Drive, Steel Deck - REF#M152
  • Transfer, 12 ft 7 Strand H78 Chain w/Attachments, Unscrambler, w/3 ft 6 Strand #200RC Chain Section, Steel Frame & UHMW Races, Head & Tail Shafts & Sprockets, 10-hp Gearhead Drive - REF#M153
  • Drop Out, Five Arm Gate w/#120RC Chain, Air Actuated, Piping & Valves - REF#M155
  • Conveyor, 62 ft 24" Belt, Steel Trough, Head & Tail Sheaves, 10-hp Gearhead Drive - REF#M156
  • Conveyor, 16 ft 36" Belt, Steel Trough, Head & Tail Sheaves, 5-hp Gearhead Drive, Air Actuated End Gate System, Piping & Valves, Controls - REF#M158
  • Rollcase, (11) 12" dia X 30" Chain Driven Rolls, Steel Frame, 5-hp Gearhead Drive, 5ft 7 Strand H78 Chain w/Attachments, Steel Frame & UHMW Races, 5-hp Gearhead Drive, Steel Slides - REF#M159
  • Rollcase, (7) 10" dia X 30" Chain Driven Rolls, Spiral Face, Steel Frame & Supports, 5-hp Gearhead Drive, Steel Slide - REF#M162
  • Transfer, 6ft 6 Strand H78 Chain, Steel Frame & UHMW Races, Head & Tail Shafts & Sprockets, 7.5-hp Gearhead Drive, Steel Deck - REF#M163
  • Rollcase , (4) 8" dia. X 30" Chain Driven Rolls, Steel Frame, 5-hp Gearhead Drive - REF#M164
  • Transfer, 58 ft 6 Strand H78 Chain, Steel Frame & UHMW Races, Head & Tail Shafts & Sprockets, 7.5-hp Gearhead Drive, Steel Deck - REF#M165
  • Transfer, 6 ft 6 Strand H788 Chain, Landing Table, Steel Frame & UHMW Races, Head & Tail Shafts & Sprockets, 5-hp Gearhead Drive, Steel Deck - REF#M166
  • Transfer, 58 ft 6 Strand H78 Chain, Steel Frame & UHMW Races, Head & Tail Shafts & Sprockets, 7.5-hp Gearhead Drive, Steel Deck - REF#M167
  • Transfer, 42 ft 6 Strand H78 Chain, Steel Frame & UHMW Races, Head & Tail Shafts & Sprockets, 7.5-hp Gearhead Drive, Steel Deck - REF#M168
  • Transfer, 42 ft 6 Strand H78 Chain, Steel Frame & UHMW Races, Head & Tail Shafts & Sprockets, 7.5-hp Gearhead Drive, Steel Deck - REF#M169
  • Transfer, 36 ft 6 Strand H78 Chain, Steel Frame & UHMW Races, Head & Tail Shafts & Sprockets, 7.5-hp Gearhead Drive, Steel Deck - REF#M170
  • Transfer, 6 ft 6 Strand H788 Chain, Landing Table, Steel Frame & UHMW Races, Head & Tail Shafts & Sprockets, 5-hp Gearhead Drive, Steel End & Side Plate - REF#M171
  • Transfer, 6 ft 6 Strand H788 Chain, Landing Table, Steel Frame & UHMW Races, Head & Tail Shafts & Sprockets, 5-hp Gearhead Drive, Steel End & Side Plate - REF#M172
  • Rollcase, (5) 12" dia. x 42" Chain Driven Rolls (one has rubber face), Steel Frame, 5-hp Gearhead Drive - REF#M173
  • Rollcase, (5) 12" dia. x 42" Chain Driven Rolls (one has rubber face), Steel Frame, 5-hp Gearhead Drive - REF#M174
  • Transfer, 42 ft 6 Strand H78 Chain, Steel Frame & UHMW Races, Head & Tail Shafts & Sprockets, 5-hp Gearhead Drive, Steel Deck - REF#M175
  • Transfer, 36 ft 6 Strand H78 Chain, Steel Frame & UHMW Races, Head & Tail Shafts & Sprockets, 5-hp Gearhead Drive, Steel Deck - REF#M176
  • Transfer, 42 ft 6 Strand H78 Chain, Steel Frame & UHMW Races, Head & Tail Shafts & Sprockets, 5-hp Gearhead Drive, Steel Deck - REF#M177
  • Transfer, 58 ft 6 Strand H78 Chain, Steel Frame & UHMW Races, Head & Tail Shafts & Sprockets, 7.5-hp Gearhead Drive, Steel Deck - REF#M178
  • Rollcase, (12) 10" dia X 48" Chain Driven Rolls (one has rubber face), Steel Frame, 5-hp Gearhead Drive, Steel Side Plate - REF#M179
  • Rollcase, (5) 5" dia X 42" Chain Driven Rolls (one has rubber face), Steel Frame, 3-hp Gearhead Drive - REF#M180
  • Conveyor, approx 24 ft Long 24" wide Belt, Steel Trough, Head & Tail Shafts & Pulleys, Belt Tensioner Pulleys, Lift/Lower Assembly (to exit railroad ties outside building), 5-hp Gearhead Drive, Steel Support Structure - REF#M181
  • Transfer, 6 ft 6 Strand H788 Chain, Landing Table, Steel Frame & UHMW Races, Head & Tail Shafts & Sprockets, 5-hp Gearhead Drive, Steel End & Side Plate - REF#M182
  • Conveyor, approx 30 ft long 24" wide Belt, Steel Trough, Head & Tail Shafts & Pulleys, Idler Rolls, Top Hold Assembly on Tail End, 5-hp Gearhead Drive, Declined, Steel Support Structure, Walkway, Ladder & Handrails, Concrete Base - REF#M183
  • Conveyor, approx 16ft long, 24" wide Belt, Steel Frame with Backstop and Curved Endstop (for timber sideways exit), Four Steel Declined Slide Arms with End Stop Plates, 5-hp Gearhead Drive, Steel Support Structure, Concrete Base - REF#M184
  • Transfer, 6 ft 6 Strand H788 Chain, Landing Table, Steel Frame & UHMW Races, Head & Tail Shafts & Sprockets, 5-hp Gearhead Drive, Steel End & Side Plate - REF#M185
  • Transfer, 66 ft 6 Strand H78 Chain, Landing Table, Steel Frame & UHMW Races, Head & Tail Shafts & Sprockets, 7.5-hp Gearhead Drive, Steel Deck - REF#M186
  • Conveyor, 20 ft 48" Belt, Steel Frame, Head & Tail Sheaves, 5-hp Gearhead Drive - REF#M187
  • Rollcase, (8) 8" dia X 36" Chain Driven Rolls, Spiral Face, Steel Frame, 5-hp Gearhead Drive, Steel End Gate - REF#M188
  • Rollcase, (8) 8" dia X 36" Chain Driven Rolls, Spiral Face, Steel Frame, 5-hp Gearhead Drive, Steel End Gate - REF#M189
  • Transfer, 40 ft 6 Strand H78 Chain, Steel Frame & Races, Head & Tail Shafts & Sprockets, 7.5-hp Gearhead Drive, Steel Deck - REF#M190
  • Rollcase, (6) 12" dia X 30" Chain Driven Rolls, Steel Frame, Air Actuated End Stop Gate, Piping & Valves, Controls, 5-hp Gearhead Drive, 6 ft 7 Strand 81x Chain w/Attachements, Steel Frame & Races, 5-hp Gearhead Drive - REF#M191
  • Transfer, 30 ft 6 Strand 81x Chain, Steel Frame & Racers, Head & Tail Shafts & Sprockets, 5-hp Gearhead Drive, Decline, Steel Slides - REF#M192
  • Conveyor, 12 ft 30" Belt, Steel Trough, Head & Tail Sheaves, 2-hp Gearhead Drive - REF#M193
  • Transfer, 10 ft 8 Strand H788 Chain, Landing Table, Steel Frame & Racers, Head & Tail Shafts & Sprockets, Steel Deck, 5-hp Gearhead Drive - REF#M194
  • Transfer, 12 ft 6 Strand 81x Chain, Steel Frame & UHMW Races, Head & Tail Shafts & Sprockets, 5-hp Gearhead Drive, (4) Six Arm Lumber Stops, Piping & Valves, Conrols - REF#M195
  • Transfer, 8 ft 10 Strand 81XHD w/Attachments, Unscrambler, Steel Frame & Races, Steel Deck, Inclined, 5-hp Gearhead Drive, Steel Slide Arms - REF#M196
  • Tipple, Six Arm, Air Actuated, Piping & Valves - REF#M197
  • Rollcase, (6) 12" dia X 42" Chain Driven Rolls, Steel Frame, End Stop, Hydraulic Drive Motor, Piping & Valves - REF#M198
  • Newnes Transfer, 6 ft 6 Strand 81X Chain, Steel Frmae & UHMW Races, Head & Tail Shafts & Sprockets, Six Arm Air Actuated Gate, Hydraulic Drive Motor, Piping & Valves - REF#M199
  • Newnes Infeed, Air Actuated Positioning System, Air Actuated Stop Hooks, Overhead Horizontal Transfer, V-Pocket Radius Back Unscrambler, Steel Support Structure, Hydraulic Drive Motor - REF#M200
  • Newnes Conveyor, 16 ft 36" Belt, Steel Trough, Head & tail Sheaves, 5-hp Gearhead Drive, Air Actuated Waste/Good Piece Selector Outfeed System, Piping & Valves - REF#M202
  • Newnes Rollcase, (11) 12" dia X 36" Chain Driven Rolls, Steel Frame, Hydraulic Drive Motor, Piping & Valves - REF#M203
  • Newnes Transfer, 5 ft 5 Strand 81XHD Chain w/Attachments, Steel Frame & Races, Hydraulic Drive Motor, Piping & Valves, Controls, Steel Slide Arms - REF#M204
  • Conveyor, 20 ft 48" Belt, Steel Trough, Head & Tail Sheaves, 5-hp Gearhead Drive - REF#M205
  • Rollcase, (11) 6" dia X 48" Chain Driven Rolls, Steel Frame, 5-hp Gearhead Drive - REF#M206
  • Rollcase, (7) 12" dia X 48" Chain Driven Rolls, Steel Frame, 5-hp Gearhead Drive - REF#M207
  • Transfer, 6 ft 7 Strand H78 Chain w/Attachments, Head & Tail Shafts & Sprockets, 5-hp Gearhead Drive - REF#M208
  • Transfer, 12 ft 6 Strand H78 Chain, Steel Frame & Races, Head & Tail Shafts & Sprockets, Steel Deck, 5-hp Gearhead Drive - REF#M209
  • Transfer, 8 ft 10 Strand H78 Chain w/Attachments, Unscrambler, Steel Frame & Races, Steel Deck, Inclined, 5-hp Gearhead Drive, Steel Slide Arms - REF#M210
  • Transfer, 12 ft 6 Strand H78 Chain, Steel Frame & Frame & Races, Head & Tail Shafts & Sprockets, Steel Deck, 5-hp Gearhead Drive - REF#M211
  • Transfer, 8 ft 10 Strand H78 Chain w/Attachments, Unscrambler, Steel Frame & Races, Steel Deck, Inclined, 5-hp Gearhead Drive, Steel Slide Arms - REF#M210 B
  • Rollcase, (6) 12" dia X 60" Chain Driven Angled Rolls, Spiral Face, Steel Face, Steel Frame, 5-hp Gearhead Drive - REF#M212
  • Transfer, 6 ft 6 Strand 81X Chain, Steel Frame & UHMW Races, Head Shaft & Sprockets, Oregon Bends, 5-hp Gearhead Drive - REF#M213
  • Transfer, 6 ft 6 Strand 81X Chain, Steel Frame & UHMW Races, Head Shaft & Sprockets, Oregon Bends, 5-hp Gearhead Drive, Air Actuated Six Arm Drop Out Gate w/#80RC Chain, Air Actuated 2 ft wide X 20 ft Steel gate, Piping & Valves, Controls - REF#M214
  • Kockums Cancar 40 HP Serial #4389 One Pump - REF#HYD Unit #10
  • Kockums Cancar 40 HP Serial #4387 One Pump - REF#HYD Unit #11
  • Kockums Cancar 2 each 40 HP Serial #4387 Two Pumps 40 HP Each - REF#HYD Unit #12
  • Pacific Fluid System 2 each 40 HP Serial #08296 - REF#HYD Unit #13
  • No Info - 30 HP - REF#HYD Unit #14
  • Kockums Cancar 7 1/2 HP Serial #4386 - REF#HYD Unit #15
  • Sering Sawmill Machine 40 HP - REF#HYD Unit #16
  • Kockums Cancar (1) - 25 HP Serial #4388 (2) - 7 1/2 HP - REF#HYD Unit #17
  • Kockums Cancar 40 HP Serial #4388 - REF#HYD Unit #18
  • Kockums Cancar 40 HP Serial #4390 & 10 HP - REF#HYD Unit #19
  • Kockums Cancar 75 HP - REF#HYD Unit #20
  • Fluid Air 20 HP Serial #A1555 - REF#HYD Unit #21
  • Hydraulic Tanks 25 - 30 available 3 gallons to 300 gallons - REF#Hydraulic Tanks
  • Lodestar Hoist, 1-ton Electronic Chain Type, Trolley, 20 ft. 8" I-Beam, Building Mount - REF#M107
  • C/M Hoist, 1-ton Electric, Trolley, 20 ft. 8" I-Beam, Building Mount - REF#M108
  • C/M Hoist, 1-ton Electric, Trolley, 80 ft. 8" I-Beam, Building Mount - REF#M110
  • Ingersol Rand 300 HP Medium Voltage Air Compressor 230Volt - REF#Air Compressor
  • Air Receiver Tanks - Assorted - REF#Air Receiver Tanks
  • SOLD Black Clawson 78 inch Horizontal/Bottom Chipper Serial #3897-74 with Drive - Key Knife conversion - REF#Black Cawson
  • Bridge Crane - REF#Crane

Simonds Levelar Type RMO942 Serial #03-942-391 - REF#Sawfiling 5

  • SOLD Armstrong #4 L.H. Serial #13986 - REF#Sawfiling 1
  • SOLD Armstrong #4 R.H. Serial #15369 - REF#Sawfiling 2
  • SOLD Armstrong #4 R.H. Serial #13975 - REF#Sawfiling 3
  • SOLD Armstrong #4 L.H. Serial #13985 - REF#Sawfiling 4
  • SOLD Simonds Levelar Type RM0942 - REF#Sawfiling 5
  • Armstrong #6 L.H. Serial #14883 - REF#Sawfiling 6
  • Armstrong Sawfiler Bench with Stretcher roll - 4 available - REF#Sawfiling 7