AESI

  • BIOMASS TO ENERGY FUEL HANDLING-2010
  • CONVEYORING & FUEL BINS IN THREE LOCATIONS, BOISE, ID, KENTUCKY & NORTH CAROLINA

ANTHONY TIMBERLANDS

  • HARDWOOD LAMINATED LUMBER PLANT
  • SHERIDAN, AR-2005 DESIGN-BUILD

BANKS LUMBER COMPANY

  • TWIN BANDMILL-2013
  • OPTIMIZED GANG EDGER 2013

COLLINS PINE LAKEVIEW

  • HEADRIG ROLLCASE WITH CANT CATCHERS
  • HORIZONTAL SHIFTER CONVERSION
  • TMT OPTIMIZING COMBO EDGER INSTALLATION
  • SMALL LOG MILL PROJECT-2007
  • 12" DA GANG INSTALL-2004
  • MILL EXIT LINE IMPROVEMENTS-2003
  • DEBARKING LINE/DESIGN, PROCURE CONTRUCT 2007
  • SMALL LOG MILL UPGRADE m TO SIDE BOARD CAPABILITY-2013

COLUMBIA FIBRE

  • CHIPPER PRESS ROLL-2205
  • CHIPPER INFEED IMPROVEMENTS-2006
  • URBAN WASTE PROJECT-2006
  • CONVEYOR REBUILD-2006
  • DESIGN LAYOUT CHIP PLANT-2008
  • CHIP PLANT DISMANTLE-2008
  • CHIPPER HOOD REPLACEMENT-2008

COLUMBIA VISTA CORPORATION

  • HEADRIG LOADING- DESIGN- BUILD-1998
  • DEBARKING LINE- DESIGN – BUILD-1992
  • NEW CARRIAGE & TRACKS INSTALLATION-2008
  • BANDMILL INSTALLATION-2009
  • STACKER LINE INSTALLATION-2008

COLVILLE POWER AND VENEER

  • COMPLETE DEBARKER & BUCKING LINE-2007
  • BOILER FEED SYSTEM WITH A TRIPPER CONVEYOR & FOUR WALKING FLOORS-2007

DOUGLAS COUNTY FOREST PRODUCTS

  • PRIMARY LINE UPGRADE-2005
  • EDGER ADDITION-2007
  • FUEL HANDLING UPGRADES FOR COGEN ADDITION-2008

ENGINEERED MATERIALS OF MAINE

  • LAMINATED BEAM PRODUCTION LINE (NEW PRODUCT) 2001
  • SORTING AND SIZING LINE FOR ABOVE-2001

FLORAGON FOREST PRODUCTS/INTERFOR PACIFIC

  • 10" GANG EDGER ADDITION MILL 5-1999
  • LOG HANDLING IMPROVEMENTS-STUD MILL-2000
  • PLANER IMPROVEMENTS-2002
  • PACKAGING- DESIGN- BUILD-INTERFOR-2008
  • OPTIMIZED LOG BUCKING-DESIGN-BUILD-2002
  • SORTER INSTALLATION AND DESIGN-2001
  • CURVE SAWING GANG INSTALLATION AND ENGINEERING-2001

GRAM LUMBER

  • PLANER MILL, HEADRIG REPLACEMENT-1995
  • 2" EDGER ADDITION-1996
  • LOG YARD RECLAIM SYSTEM-1988

HAMPTON LUMBER MILLS

  • MORTON SAWMILL-FLAIR EDGER, FABRICATION AND INSTALLATION-2002
  • MORTON SHARP CHAIN-DESIGN-BUILD-2000
  • A-5 DEBARKER REBUILD AND INSTALLATION-WILLAMINA 2007
  • PLANER PACKAGING LINE-WILLAMINA 2007
  • TILT HOIST AND RE-ENTRY FOR THE NEW PLANING MILL-WILLAMINA 2008
  • LUG FEEDER AND UNSCRAMBLER AT TILLAMOOK-2007
  • DEBARKER WASTE SYSEM REMODEL-WILLAMINA 2006
  • FINGER JONT FEED SYSTEM BLOCK BINS-WILLAMINA 2006
  • MORTON 35" DEBARKER-2005
  • RANDLE SCC STACKER LINE-2005
  • PLANER PACKAGING LINE #2-WILLAMINA
  • TILLAMOOK-BOILER FUEL HANDLING 2006
  • WARRENTON-DESIGN, FAB AND INSTALL LOG MERCHANDIZER LINE-FOUR LINEAL POSITIONED SAW MODULES WITH EASY DOWN LOG CRADLES WITH ENCODED VFD

DRIVES THROUGH OUT, 2011

  • WARRENTON-DESIGN, FAB AND INSTALL THREE ARM, 42' LONG, ENCLOSED ROTARY LOG KICKER WITH ROTARY ARMS IN TWO 20' SECTIONS WITH ENCODED VFD DRIVES-2011
  • WARRENTON-INSTALLATION OF USNR-DLI PRIMARY LOG BREAKDOWN LINE/INFEED & OUTFEED/RECONDITIONED LOG DECKS & STEP FEEDER/ALL SUPPORT STEEL, CATWALKS AND DECKING-2011

HUMBOLDT REDWOOD COMPANY, LLC-SCOTIA, CA.

  • EPC A TWIN BANDMILL SYSTEM FOR RECOVERY-2012
  • EPC A GRADE SAWING SIDE TO THE MILL INCLUDING A PONY CARRIAGE, QUAD BANDMILL, TIMBER TRIM LINE, COMPLETE RESIDUAL SYSTEM REMODEL-2013

INTERFOR PACIFIC

  • PACKAGING LINE-2006

INTERMOUNTAIN RESOURCES, LLC

  • ALL JOBS ON A DESIGN/BUILD BASIS
  • HORIZONTAL SHIFTERS, 2" EDGER SHARP CHAIN ADDITION
  • SMALL DEBARKER LINE-1998
  • REMAN EDGER ADDITION-2000
  • STUD STACKER ADDITION-2000
  • HEADRIG ROLLCASE AND JUMP CHAINS-1997
  • LUNDEEN STACKER ADDITION-1999
  • OPIMIZED EDGER INSTALL-2001
  • REPLACE ENTIRE HEADRIG AREA 2002-03
  • FINGER JOINTER AND OPTIMIZED CUT-UP LINE-2009
  • BOILER PLANT RELOCATION 2009 & 2010

KING FOREST PRODUCTS

  • A-7 NICHOLSON-1998
  • CHIP PLANT-DESIGN AND CONSTRUCT-1998

KINZUA RESOURCES LLC/BOISE CASCADE-PILOTROCK

  • MCGEEHEE SL ADDITION FIELD SERVICES & FABRICATION-2000
  • 12" USNR DOUBLE ARBOR GANG-ENGINEER AND BUILD-2002
  • HORIZONTAL CAPACITY MODIFICATIONS-2002
  • HORIZONTAL OUTFEED MODIFICATIONS FOR 12" CANTS-2003
  • SORTER DIVERTER CONVERSION-2003
  • TRIMMER OUTFEED
  • BOILER STARTUP WITH FUEL HANDLING 120,000 LB/HR

LONGVIEW FIBER-CLATSKANIE

  • REPLACE THE 9 X 40 DRUM AND REBUILD SUPP0RT FRAMES
  • 12 X 20 BM&M SCREEN INSTALLATION

MAINE WOODS CO.

  • TURN KEY HARDWOOD SAWMILL-1998
  • INCLUDING SAWMILL, SORTER, BOILER & KILNS/WITH FUEL HANDLING
  • 40,000 LB. BOILER

MARY'S RIVER LUMBER CO.

  • PLANER MILL INSTALLATION AND MISCELLANEOUS SAWMILL ADDITIONS-MONTESANO 1999
  • S-TURN UNSCRAMBLER, HORIZONTAL FEED REVISIONS, QUAD BANDMILL INSTALLATION-MONTESANO 1998
  • SHARP CHAIN FABRICATION AND INSTALLATION-MONTESANO 1998
  • LUMBER SORTER/TRIMMER-MONTESANO
  • OPTIMIZER PROJECT-ENGINEERINGAND INSTALL-2003
  • BEVEL SIDING PLANT ADDITION-2006
  • PLANT REMODEL/PHILOMATH RESAW/TRIM LINE-2002
  • OPTIMIZING EDGER/PHILOMATH-2005
  • TRIMMER INFEED REMODEL
  • HEADRIG SLABBER INSTALLATION & ENGINEERING
  • COMPLETE DEBARKING LINE, BUCKING & HOG SYSTEM AT MONTESANO, WA-2009
  • MONTESANO-DESIGN, FAB AND INSTALL LOG FLARE BUTT REDUCER-2011
  • MONTESANO-DESIGN, FAB AND INSTALL ROTARY SCREW LOG FEEDER FOR SINGULATING AND EVEN ENDING OF LOGS-2011
  • ENGINEERING FOR NEW MILL-2013 (IN PROGRESS)
  • BOW HILL LUMBER UPGRADE-2013 (IN PROGRESS)
  • SCRAGG FOR PHILOMATH-2013

OLYMPIC FOREST PRODUCTS

  • HEADRIG OUTFEED ROLLCASE & TRANSFERS
  • HITECH SORTER, HORIZONTAL TWIN-INSTALL & FAB.
  • DESIGN & INSTALL 3 EDGER SYSTEMS
  • NEW HEADRIG & CARRIAGE-WASTE SYSTEMS-2000
  • TWO WCIS EDGER OPTIMIZERS/COMPLETE -2002
  • REMODEL WITH 5 MAJOR MACHINERY CENTERS-2003
  • TIMBER HANDLING AND SAW-2014
  • PURLIN EDGER ADDITION-2014

REDWOOD EMPIRE

  • ADDITION OF A RECONDITIONED OPTIMIZED TRIM LINE, RE-EDGER, MATERIAL HANDLING, STARTUP

RECOVERY 1, INC.

  • COMPLETE RECYCLING SYSTEM FOR WASTE WOOD TO PAPER CHIPS
  • 1000HP HOG & 300HP/ 2-10 X 20 BM&M SCREENS

ROSEBURG FOREST PRODUCTS-2008

  • SUPER DRYER SUPPORT STRUCTURES & TOWERS
  • TOTALLY ENCLOSED FEED STOCK CONVEYORING TO SUPER DRYER

RSG FOREST PRODUCTS-24 years of Design, Manufacturing and Construction (Various Plant Sites)

  • TRIMMER OPTIMIZER ADDITION, HORIZONTAL
  • RESAW INFEED SYSTEM-2 PLACES
  • PLANER SORTER LINE KALAMA- 2000
  • TWIN HORIZONTAL, 2" EDGER, HORIZONTAL-2000
  • NEW CHIPPER SYSTEM
  • OPTIMIZED TRIMMER, OPTIMIZED EDGER,
  • GANG, TIMBER SYSTEM MATERIAL HANDLING
  • HEADRIG ROLLCASE, DEBARKER INFEED,
  • CHIP SYSTEM, HITECH SORTER SYSTEM
  • TRIMMER OPTIMIZER, COASTAL PLANER,
  • GANG EDGERS (4 PLACES) AND BOARD EDGER (5 PLACES)
  • 2002:
  • HORIZONTAL TWIN AND GANG ADDITION KALAMA
  • STICKER STACKING SYSTEM, WET LUMBER DROPOUT
  • EIGHT WCIS MANUFACTURED EDGER OPTIMIZERS
  • COMPLETE MILL REBUILD WITH SIX NEW MACHINERY CENTERS-MOLALLA-2005 COMPLETION
  • PRECISION MILL DEBARKER REBUILD 2006
  • DEBARKER INFEED CONVEYOR 2006
  • NEW PLANER MILL MOLALLA-2006
  • BANDER DUNNAGE UPGRADE-2013

ROUGH AND READY LUMBER-2014

  • TIMBER DOCK
  • REFURBISH AND INSTALL 12" OPTIMIZING GANG
  • SAWMILL TRIMMER LINE
  • SAWMILL SORTER SYSTEM
  • PLANER SORTER/STACKER LINE
  • PLANER INFEED SYSTEM
  • PLANER SYSTEM
  • TWIN RESAW

SARATOGA FOREST MANAGEMENT

  • REBUILD AND STARTUP OF THE SAWMILL INCLUDING FLARE BUCKING LINE, OPTIMIZED EDGER, RESIDUAL SYSTEMS AND TRIMMING, STACKING LINES-2012, 2013
    SCANWARE
  • SCAN FRAMES-12 SYSTEMS

SPANISH TRAIL LUMBER-MARIANNA, FL.

  • TMT EDGER INSTALL-2009
  • COMACT CURVE SAW GANG INSTALL-2009
  • MULT-Saw LOG MERCHANDIZER-2010
  • NELSON BROTHERS TRIMMER SCANNER UPGRADE-2010
  • TMT REMAN EDGER-EPC CONTRACTOR-2012
  • DEBARKER INSTALL-2013
  • RESIDUAL UPGRADE-2013

STIMSON

  • TILLAMOOK PLANER FABRICATION
  • GANG EDGER INFEED
  • NEW DEBARKER INSTALLATION-2006
  • FENCING ADDITION-PLUMMER-2011
  • DESIGN, BUILD AND INSTALL ALL SUPPORT EQUIPMENT FOR USNR PRIMARY LINE
    REBUILD-TILLAMOOK-2011
  • UPGRADE CANTER TO CANTER TWIN-2013 (JOB IN PROGRESS)

SWANSON GROUP

ROSEBURG

  • USNR EDGER OPTIMIZER PLANNING AND INSTALLATION
  • INSTALLATION OF NEW PLANNING MILL-2005
  • FABRICATION OF MATERIAL HANDLING FOR PLANER MILL-2005
  • DEBARKER INSTALL-2013

NOTI

  • VERTICAL TWIN SYSTEM AND OPTIMIZED EDGER UPGRADE-2007
  • SORTER ADDITION-2004

SUPERIOR LUMBER-GLENDALE

  • REVISIONS TO UPGRADE USNR PLANER
  • LOG BUCKING SYSTEM REMODELS
  • END DOGGER UPGRADES-2011
  • QUADRANT LOG FEEDER REBUILD AND INSTALL-2013
  • DRY KILNS-2013
  • PLANER INFEED UPGRADE-2013
  • GRADE SORTER UPGRADE

SPRINGFIELD PLYWOOD VENEER

  • DEBARKER & BUCKING UPGRADES-2007
  • DRYER REBUILD PROJECT-2008
  • LATHE LINE UPGRADES-2008
  • LAYUP LINE INSTALLATION-2009
  • LAYUP LINE FABRICATION OF SUPPORT STEEL, PACKAGE TRANSFERS & ROLLCASES

TEEVIN BROS. LAND AND TIMBER COMPANY

  • RAINIER DEBARKER PROJECT-2013

TOLER & SON LUMBER COMPANY

  • HORIZONTAL RESAW ADDITION
  • LOG DECK AND LOADING SECTION FOR CARRIAGE
  • MILL FLOW CHANGES
  • WASTE SYSTEM REMODELS
  • BOILER FUEL BIN-2006
  • COMPLETE HOG FUEL SYSTEM-2006

TRINITY RIVER LUMBER

  • HORIZONTAL TWIN, 4" GANG, WCIS OPTIMIZING EDGER/RESIDUAL SYSTEMS ETC.-2008
  • COMPLETE 40,000 SQ. FT. SAWMILL FROM GROUND UP – DESIGN, PROJECT MANAGEMENT, SUPPLY AND INSTALLATION SERVICES
  • TWO PLANER LINE, TWO TRIMMER LINES, ONE SORTER LINE
  • REFURBISH EXISTING LOG HANDLING EQUIPMENT AND DEBARKER
  • SUPPLY AND INSTALL DUAL SHIFTING 84" CHOP SAWS
  • INSTALL 6' TILTED HEADRIG, SLANT 48" CARRIAGE
  • INSTALL 6' TWIN HORIZONTAL RESAW
  • INSTALL 5' HORIZONTAL RESAW
  • INSTALL THREE EDGER SYSTEMS, COMPLETE WITH WCIS SUPPLIED OPTIMIZED C-FRAME CLAMP AND SCAN INFEED CHARGERS
  • REFURBISH AND INSTALL 4X4 TRIM LINE
  • REFURBISH AND INSTALL 48 BIN SORTER
  • REFURBISH AND INSTALL YATES A100 PLANER
  • REFURBISH AND INSTALL YATES A95 PLANER
  • REFURBISH AND INSTALL COMPLETE 2X4 TRIM LINE, NOMINAL TRIMMER AND P.E.T. TRIMMER
  • SUPPLY AND INSTALL COMPLETE MILL RESIDUAL SYSTEM
  • FABRICATE AND REFURBISH NEARLY ALL MATERIAL HANDLING BETWEEN MACHINE CENTERS.
  • 4 X 4 PET TRIMMER-2013
  • 2 X 4 TRIM SAWS-2013
  • SORTER BINS-2013
  • INSTALL TRIM SAWS-2013

TMI

  • BUIILDING ADDITION, OPTIMIZED BOARD EDGER, RESAW, LANDING TABLE, SORT STATION, COMPUTER ROOM-2003
  • DOG EAR LINE-DESIGN-BUILD-2005
  • MAXIMILL ADDITION-2006
  • OPTMIZED GANG EDGER INSTALL-2013

UNIVERSAL FOREST PRODUCTS (Various Plant Sites)

  • RIP SAW INFEED TABLES
  • LUG FEEDERS
  • MOULDER FEED TABLES
  • MATERIAL HANDLING
  • EQUIPMENT FOR RIPSAWS, PLANER

UPPER COLUMBIA

  • DEBARKER LINE INSTALLATION-2008
  • 6-SAW LOG MERCHANDIZER-2013
  • NEW DEBARKER LINE-2013
  • EPC CONTRACTOR ON BOTH SYSTEMS-2013

USNR

  • TURNKEY RESAW, HEADRIG OUTFEED INSTALLATION, FAB, SUPPORT ITEMS & DESIGN-TOLER LUMBER
  • CENTRALIA MATERIAL HANDLING
  • SUN STUDS PACKAGING
  • SUPPORT ROLE IN USNR MATERIAL HANDLING AND INSTALLATION MISC. PROJECTS
  • CHUGOKU MERCHANDISER FABRICATION & MILL FLOOR MATERIAL HANDLING
  • WEYERHAEUSER SANTIAM LOG HANDLING EQUIPMENT
  • WEYERHAEUSER SANTIAM LUMBER HANDLING EQUIPMENT
  • BENNETT SORTER LINE
  • LOG HANDLING EQUIPMENT FOR RUSSIA-2012

W.K.O. /HIGH CASCADE

  • NEW PLANER MILL CONSTRUCTION-WKO 2000
  • TRIMMER UNSCRAMBLER-WKO 1996
  • VENEER DIVERTERS-HIGH CASCADE 1992
  • 3- STAGE SHIFTING TRIMMER FENCE-WKO 2000
  • 12" DAC UKIAH-WKO
  • OPTIMIZER CONVERSION ON A BOARD EDGER-WKO
  • SMALL LOG ADDITION-WKO
  • GANG OPTIMIZER INSTALLATION-WKO
  • HANEL MILL REBUILD WKO 2004/2005
  • DOUBLE LENGTH DESIGN/FAB/INSTALL-WKO 2008

WEYERHAEUSER

  • TRUS JOIST- BUNDLE NESTING AND PAKAGING LINE-2005
  • LEBANON LUMBER- A-5 DEBARKER, INFEED,
  • QUAD FEEDER AND OUTFEED-DESIGN AND INSTALL
  • BAUMANS-PLANER PACKAGING LINE FOR DUNNAGE PLACEMENT
  • DALLAS-TWIN HORIZONTAL RESAW INSTALL
  • SANTIAM RESIDUAL CONVEYOR SYSTEMS
  • DALLAS HOG FUEL HANDLING TO REPLACE HIGH PRESSURE BLOWER SYSTEM
  • COASTAL PLANER ADDITION-BAUMAN
  • HEADRIG LOG LOADING-BAUMAN

WILLIS ENTERPRISES

  • 600' OF 42" CONVEYORING FOR CHIP HANDLING TO TRUCK OR TRAIN CARS AT CLE ELUM, WA-2007
  • CHIP PLANT AT HOQUIAM-2008-2009
    117" NICHOLSON CHIPPER
    9 X 60 PSI DRUM DEBARKER
    LETOURNO LOG CRANE
    HOG FUEL & CHIP HANLDING
  • CHIPPER INSTALLATION AT BELFAIR-2008
    96" CHIPPER & CHIP CONVEYORS
    RAISE THE DRUM DEBARKER LINE BY 6'

W.K.O./HIGH CASCADE

  • NEW PLANER MILL CONSTRUCTION-WKO 2000
  • TRIMMER UNSCRAMBLER-WKO 1996
  • VENEER DIVERTERS-HIGH CASCADE 1992
  • 3- STAGE SHIFTING TRIMMER FENCE-WKO 2000
  • 12" DAC UKIAH-WKO
  • OPTIMIZER CONVERSION ON A BOARD EDGER-WKO
  • SMALL LOG ADDITION-WKO
  • GANG OPTIMIZER INSTALLATION-WKO
  • HANEL MILL REBUILD WKO 2004/2005
  • DOUBLE LENGTH DESIGN/FAB/INSTALL-WKO 2008
  • BOILER RELOCATION WITH A CLARKES FUEL BIN FROM SAGINAW, OR TO CARSON, WA-1992